We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Boss Eliminator - Repair & Maintenance Videos
Operating System Replacement
Complete guide on replacing a Boss Operating System. The OS consists of every electrical component required for the applicator to run. Remove the old system, install the new, and you are guaranteed back up and running at a fraction of the cost of buying new.
PSI Adjustment
From time to time, after an Eliminator pump has worn-in, it may continue to audibly run-on even while the trigger is not being pressed. This video outlines the step-by-step instructions of re-calibrating the pump to perfect working order. All that is required is a #2 Phillips screwdriver to complete this procedure.
Priming & Flow Rate Troubleshooter
When a new sprayer will not prime or the flow rate has dropped over time, this video works through every area that may cause a restriction of flow on your Boss applicator.
Wand Repair & Maintenance
How to service your wand and replace the seals with the wand repair kit.
Testing the Pump Pressure Switch
When a pump does not respond, this quick test will isolate out the pressure switch to confirm whether the switch needs replacement, or you need to replace the complete operating system.
Trigger Gun Repair & Maintenance
How to service and maintain your trigger gun including replacing the internal components with the trigger gun repair kit.
Wiring Repair
If one of the two speed settings on the rocker switch of your Boss Sprayer will not respond, follow this tutorial for restrengthening wiring connections for a permanent solution.
